When resurfacing only is required, mix parts A and B only and roll down or skim coat with a trowel. Perma Patch may be feathered down to 1/16 of an inch. Use for permanent repair jobs with easy instruction on product label. No extra bonder is needed. 24 to 48 hour dry time in warm weather. Uses include inside and outdoor repair.

A Super fast drying concrete patching, repair and resurfacing kit with a 5 gallon pail,  resin & hardener with aggregate for the strongest possible patch on concrete. This 100% concrete patch, resurfacing & repair kit is used on plant floors, sidewalks, driveways, basement floor. bricks and stones, steps and walls, etc. where minimal down time is required. Ready for traffic in under 30 minutes.  Designed for use on concrete floor areas which are subjected to heavy abrasive traffic, high impact and corrosive spillage. 

Patch will bond to concrete, metal, wood, & more. 

Use for repair with minimum dry time required and for areas that need to be in use within 1/2 hour. No extra bonder is needed. 

For concrete repair work that requires immediate dry time.

# TZ-10-99VO Vertical and Overhead Patch
 

Concrete repair compound for vertical and overhead patching.

A concrete patch designed for resurfacing and repairing concrete and masonry surfaces. Kit contains all you need for wall or overhead patching binder. It makes a mixture applied over a dampened surface at an average thickness of 1/8". Water proofing patching kit. See label for full instructions on all patch and resurfacing applications. For use in areas where a permanent repair patch or concrete resurfacing  and a overhead patch is needed. Ready for immediate UPS shipment.

#IPI 680  EPOXY PATCH KIT SEALER
 

A concrete patching and repair kit containing resin and hardener. No aggregate. Use for concrete patch, resurfacing and repairs on hard surfaces. May be brushed or rolled on to floors for a protective and extremely hard surface during repairs. This can be used  for repairs on stone surfaces, in plants. on bricks and stones to create a protective floor seal . Can also be used to fill and patch cracks, holes, breaks, and cracks. Helps to water proof and create a chemical resistant surface.

#1044 LT - LOW TEMPERATURE / FREEZER POLYESTER PATCH / FOR REPAIR AND RESURFACING
 

Fast setting concrete patch repair with ability to be used in freezing temperatures during repairs. These patch products can be used to repair and for resurfacing concrete in freezer floor areas where the temperature must be below freezing point during and after application. Packed in 5 gallon bucket which also serves as mixing bucket. Stock item available for immediate UPS shipment.

#IPIAC-274 CONCRETE BONDER
Insure a sure bond.
 

 Concrete bonder acrylic adhesive makes concrete resurfacing or repairs that hold. This concrete bonder aids repair and contains an exceptional acrylic polymer formulation that insures strong, permanent bond between new and old concrete, mortar or plaster. Just brush it on any clean, sound surface and apply the new cement mix. Use inside or outside. This product will increase bonding strength 8 to 10 times when applied as directed. Eliminates the need to chip or roughen the areas where  resurfacing or repair is desired.

User should fix or patch any existing cracks and holes in concrete floor or surface before application. 

TZ-HYDROSHIELD WB has been primarily designed to seal masonry walls, concrete slabs, decks, concrete walls, and abutments from both water and chloride intrusion while providing for water vapor transmission (breathability).