ULTRA
POLY BARRIER rFOILTM is a double layer of ultra
thick polyethylene bubbles bonded to, and sandwiched between a
layer of aluminum FOIL and a layer of white polyethylene. Ultra
Poly is an alternative under-slab radiant barrier installed with
white poly side up
Primary
Uses
Alternative to Concrete Barrier
Under Concrete
Radiant Floor Heating
Snow Melts
Advantages
Keeps basement floors dry
An alternative to foam board
Cost effective
Can be installed over uneven ground
Radiates heat upward
TVM DBL-BUBBLE FOIL
rFOIL
Product Code: 200.02.002.MB910
rFOILTM DOUBLE BUBBLE FOIL
Our standard grade FOIL/ DOUBLE BUBBLE/FOIL reflective
insulation. 99.9% aluminum FOIL on both sides of a
single layer of polyethylene bubbles. rFOILTM
DOUBLE BUBBLE FOIL is excellent for residential,
commercial and HVAC applications where optimal
protection from radiant heat is needed. A double core of 8mil Polyethylene
bubbles sandwiched between 2 layers of rFOILTM
reflective sheets.
Primary
Uses
Between Joists with radiant heating (hydronics)
Duct and hotwater tank wrap
Interior walls and ceiling insulation
Features
99.9% pure aluminum
97% reflectivity
0.03 emissivity
0.275 thick rFOILTM
8 mils thick Polyethylene bubbles
Class A/Class 1 fire ating
Less than 0.01 Perms
100% Vapor barrier
TVM NT Radiant
Barrier
Product Code: 200.02.002.MB920
ULTRA
NT-RADIANT BARRIER rFOILTM
An ultra strong, tear resistant, radiant barrier for controlling
radiant heat gain and loss in attics. Two sheets of pure
aluminum FOIL provides the highest reflectivity of any radiant
barrier available. An inter-woven polyethylene mesh ensures
unrivalled durability and long life. A layer of woven
polyethylene material between 2 radiant barrier aluminum rFOIL
layers for a No Tear radiant barrier.
Features
No Tear
0.011" Thick
51.88lbs/in Tensile Strength
115psi Puncture Resistance
Class A/Class 1 Fire Rating
97% Reflectivity
Primary
Uses
Attic and crawlspace
Cold Storage and Refrigeration
House and Building wrap
TVM Ultra CBF
Concrete Barrier rFOIL
Product Code: 200.02.002.MB930
ULTRA
CONCRETE BARRIER rFOILTM
is engineered specifically for use underneath concrete. It
dramatically improves the performance of radiant heating systems
and provides enhanced temperature maintenance for concrete
floors. ULTRA CBF is the only insulation with a patented Bubble/FOIL/Bubble
configuration on the market.
ULTRA CONCRETE BARRIER rFOILTM: a single layer
of Radiant Barrier aluminum rFOILTM sandwiched
between two layers of ultra strong Polyethylene bubbles.
Primary Uses
Under Concrete
Insulation for Radiant Heating Applications
Insulation for Outside Foundation Walls
Under Carpet
Advantages
Concrete Insulation
Creates an ideal under concrete insulation
Is an excellent Vapor and Radon Barrier
Easy to install
Reflects radiant energy in the desired direction
Not affected by moisture or humidity
Does not promote the growth of Fungus, Bacteria or
Rodents
ULTRA
POLY BARRIER rFOILTM is a double layer of ultra
thick polyethylene bubbles bonded to, and sandwiched between a
layer of aluminum FOIL and a layer of white polyethylene. Ultra
Poly is an alternative under-slab radiant barrier installed with
white poly side up
rFOILTM DOUBLE BUBBLE FOIL
Our standard grade FOIL/ DOUBLE BUBBLE/FOIL reflective
insulation. 99.9% aluminum FOIL on both sides of a
single layer of polyethylene bubbles. rFOILTM
DOUBLE BUBBLE FOIL is excellent for residential,
commercial and HVAC applications where optimal
protection from radiant heat is needed. A double core of 8mil Polyethylene
bubbles sandwiched between 2 layers of rFOILTM
reflective sheets.
ULTRA
NT-RADIANT BARRIER rFOILTM
An ultra strong, tear resistant, radiant barrier for controlling
radiant heat gain and loss in attics. Two sheets of pure
aluminum FOIL provides the highest reflectivity of any radiant
barrier available. An inter-woven polyethylene mesh ensures
unrivalled durability and long life. A layer of woven
polyethylene material between 2 radiant barrier aluminum rFOIL
layers for a No Tear radiant barrier.
